Dealer Portal

15A Standard Power Conditioner with Sequencer

Furman M-8S

Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.

Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired.

Install an M-8s in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load.

Includes 3 delayed outlet banks - each with 2 outlets - plus 2 unswitched outlets.

  • Power Sequencing
    • Prevents excessive inrush currents.
    • Six sequenced rear panel outlets (in three groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
    • Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
  • Noise Filtration
    • Noise filtering to reduce radio frequency and electromagnetic interference.
  • Surge Protection
    • Ensures equipment stays safe.
  • 9 Total Outlets
    • Eight rear panel outlets and one front panel convenience panel outlet.
  • 15 Amp Rating
    • 15 amp rating, with circuit breaker.
  • "Protection OK" Indicator
    • Front panel indicator LEDs for Outlet Banks, Protection OK and Power Status.
  • Wall Wart Spacing
    • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
  • All settings and configurations available on rear panel.

3 Year Limited Warranty